Feature |
Value |
| Effective diameter of drive pinion |
19.1 mm |
| Working stroke |
1,000 mm |
| Size |
45 |
| Stroke reserve |
0 mm |
| Toothed-belt stretch |
0.187 % |
| Toothed-belt pitch |
2 mm |
| Assembly position |
Horizontal |
| Guide |
Recirculating ball bearing guide |
| Design structure |
Electromechanical linear axis
With toothed belt
With integrated drive |
| Motor type |
Stepper motor |
| Position detection |
Motor encoder
For proximity sensor |
| Referencing |
Fixed stop block positive
Fixed stop block negative |
| Rotor position sensor |
Absolute single turn encoder |
| Rotary position encoder measuring principle |
Magnetic |
| Temperature monitoring |
Shutdown at over-temperature
Integrated precise CMOS temperature sensor with analogue output |
| Additional functions |
User interface
Integrated end-position sensing |
| Display |
LED |
| Ready status display |
LED |
| Max. acceleration |
6 m/s2 |
| Max. speed |
1.2 m/s |
| Repetition accuracy |
±0,1 mm |
| Digital logic output characteristics |
configurable
Not electrically isolated |
| Duty cycle |
100 % |
| Insulation protection class |
B |
| Max. current, digital logic outputs |
100 mA |
| Max. current consumption |
5.3 A |
| Nominal voltage DC |
24 V |
| Nominal current |
5.3 A |
| Parameters configuring interface |
IO-Link
User interface |
| Rotor position encoder resolution |
16 Bit |
| Permissible voltage fluctuation |
+/- 15 % |
| Power supply, type of connection |
Plug |
| Power supply, connection technology |
M12x1, T-coded to EN 61076-2-111 |
| Power supply, number of pins/wires |
4 |
| Authorisation |
RCM Mark |
| KC mark |
KC-EMV |
| CE mark (see declaration of conformity) |
to EU directive for EMC
in accordance with EU RoHS directive |
| Vibration resistance |
Transport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance |
Shock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27 |
| Storage temperature |
-20 ... 60 °C |
| Relative air humidity |
0 - 90 % |
| Protection class |
IP40 |
| Safety class |
III |
| Ambient temperature |
0 ... 50 °C |
| Note on ambient temperature |
Above an ambient temperature of 30°C, the power must be reduced by 2% per K. |
| Area moment of inertia 2nd degree Iy |
140 * 1003 mm4 |
| Area moment of inertia 2nd degree Iz |
170 * 1003 mm4 |
| Max. force Fy |
300 N |
| Max. force Fz |
600 N |
| Max. torque Mx |
5.5 Nm |
| Max. torque My |
4.7 Nm |
| Max. torque Mz |
4.7 Nm |
| Max. feed force Fx |
75 N |
| Reference value for working load, horizontal |
2.5 kg |
| Torsional mass moment of inertia It |
8.5 * 1003 mm4 |
| Feed constant |
60 mm/U |
| Moving mass |
169 g |
| Moving mass with 0 mm stroke |
169 g |
| Slide weight |
55 g |
| Product weight |
4,090 g |
| Number of 24 V DC digital logic outputs |
2 |
| Number of digital logic inputs |
2 |
| Specification, logic input |
Based on IEC 61131-2, type 1 |
| Logic input working range |
24 V |
| IO-Link, SIO mode support |
Yes |
| Logic input characteristics |
configurable
Not electrically isolated |
| IO-Link, protocol |
Device V 1.1 |
| IO-Link, communication mode |
COM3 (230.4 kbd) |
| IO-Link, port type |
A |
| IO-Link, number of ports |
1 |
| IO-Link, process data width OUT |
2 Byte |
| IO-Link, process data content OUT |
1 bit (Move in)
1 bit (Move out)
1 bit (Quit Error) |
| IO-Link, process data width IN |
2 Byte |
| IO-Link, process data content IN |
1 bit (State Device)
1 bit (State Move)
1 bit (State in)
1 bit (State out) |
| IO-Link, Service data contents IN |
32 bit Force
32 bit Position
32 bit Speed |
| IO-Link, minimum cycle time |
1 ms |
| IO-Link, data memory required |
0.5 Kilobyte |
| Max. line length |
15 m outputs
15 m inputs
20 m with IO-Link operation |
| Switching logic, outputs |
PNP (positive-switching) |
| Input circuit logic |
PNP (positive-switching) |
| IO-Link, connection technology |
Plug |
| Logic interface, connection type |
Plug |
| Logic interface, connection technology |
M12x1, A-coded in accordance with EN 61076-2-101 |
| Logic interface, number of poles/wires |
8 |
| Logic interface, connection pattern |
00992264 |
| Material of end caps |
Die-cast aluminium, painted |
| Material of profile |
Anodised wrought aluminium alloy |
| Materials note |
Contains PWIS substances
Conforms to RoHS |
| Material cover tape |
Stainless steel strip |
| Material drive cover |
Die-cast aluminium, painted |
| Material guide slide |
Heat-treatment steel |
| Material guide rail |
Heat-treatment steel |
| Material pulleys |
High alloy steel, non-corrosive |
| Material slide |
Aluminium die cast |
| Material toothed belt |
Polychloroprene with glass fibres |
Newsletter